Beyond INF-B Manual del operador descargar pdf (Pagina 105)

Communication Menu Configuration

26.5 AddRES Enter ADDRESS SELECTION SUBMENU

Press ‘RESET/ENTER’ 60) Display shows "StOREd" stored message momentarily and then

advances to the "AddRES” Address selection submenu.

• This menu is applicable to the RS-485 Option only to designate different

address for each device or controller in the Multi-point Serial

Communication network that allows hosting device to recognize and

communicate properly as labeling or naming purposes.

Press ‘RESET/ENTER’ 61) Display flashes "001" Address Value 1 as default.

Press ‘䊱/MAX’ & ‘

䊳

/MIN’ 62) To modify and select Address Value for your choice of setting. This

controller supports value within 000 – 199.

26.6. SERCNt Enter SERIAL COUNT SUBMENU

Press ‘RESET/ENTER’ 63) Display shows "StOREd" stored message momentarily and then

advances to the "SERCNt" Serial Count submenu.

• Serial Count menu is used to program the number of readings the meter

just take (programmable from "00001" to "59999") between

transmissions of data via the Serial Communication Option Board.

Caution: For proper communication, do not set Serial Count Value at

"00000".

Press ‘RESET/ENTER’ 64) Display flashes "00001" as default Serial Count value.

Press ‘䊱/MAX’ & ‘

䊳

/MIN’ 65) To modify and select the desired value of Serial Count (number of

readings) between data transmissions.

Press ‘RESET/ENTER’ 66) Display shows "StOREd" stored message momentarily and then

advances to the "COLOR" LED Color Select submenu.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 131 132

Sin comentarios

Beyond INF-B Manual del operador Pagina 105